August 3, 2025
Description
for a board based on IP5389 chip
designed for 4s1p 32700 or 32650 batteries
can be easily disassembled
has room for additional balancer, install it before you glue everything
you will need 4x m3 threaded inserts, there is also a piece to prevent bulging of those thin walls on the corners when you heat the inserts
!!! if you will use LiFePO4 batteries, make sure that you set the correct voltage (3.6v) with a resistor on the board. You should also set the capacitance of one battery with another resistor (see item description on aliexpress).
no supports needed
mine is printed out of PETG
License:
Creative Commons - Attribution - Share Alike
Mosmix
