Ryobi Link Single Tool Holder

Ryobi Link Single Tool Holder. Two different parts (Like the ones shown in photos). I have the Ryobi glue gun on my first printed one. The purchased ones say up to five pounds. Two parts for four different tool positions. I have uploaded three files. The standard uses and 8-32 1/2 length screw, I put up a metric one that would use M4x0.7 I think 12 or 14mm. I might make the top of the base a little thinner and I have thought of reinforcing the 90-degree part of the base. The first one two colors was matte brown PLA with the grey being PETG.

Update 8/21/2025 1700 Printing base now leftover PLA 60% will update if it's good (these are mounted high on a wall next to a 1968 Camaro, not mine).
Update 8/21/2025 1730 60% Base finished feels as tough. 100% PETG Lime Green 172g , 60% Mixed PLA/PLA+ 109g (getting rid of old spools).

4volt/USB Lithium https://www.thingiverse.com/thing:7115096 (Same Base).

Base timelapse https://youtu.be/oeTsjQmSYRo
Mount/Insert timelapse https://youtu.be/EvpZkaJIQGM (video is a blur at the end, had to speed the machine up 150% so I wouldn't be later for work [Clocked in right on time]).

These only cost about $8 USD in store. PETG cost about $3 USD.
I will be adding a mount/insert soon for the Ryobi USB Lithium (4v) soon. Can't buy it so might as well make it. Be a separate thing/post when I do, but will cross reference.