NEW - 2 Way Adjustable Phone Clamp for Golf Cart

This phone holder is designed to attach to a golf cart with 26 - 32mm (1" - 1.25") frames, and adjust for a wide variety of phone sizes (60mm-95mm wide, up to 14mm thick). The adjustment for the phone is made possible by releasing the clamp lever pressure and sliding the moving part in or out. Hold the phone and clamp together while firmly locking the lever to secure the phone in place.

The cart frame clamp is sized for the larger profile. The adaptor allows it to be secured to the smaller cart frame profile as needed.

Differences of the remix compared to the original:
This version replaces the ball joint clamp with 2 way adjustable joints. This design has proven to be more stable and robust in day to day use. The original ball joint could loosen due to vibration.

The main body of the phone holder will screw onto the threaded end of the 2 way clamp. Check the final alignment of the phone holder and reattach after applying super glue to the threads.

All STL's are saved in the correct orientation for printing:

PLA works great
0.25mm resolution with 15% infill
Supports required for “Main_Body_3”
Supports required for “Lever”
Supports required for “1in_Frame_Adaptor”
Brim required for “2_Way_Clamp_Nut_x2”

Hardware required:

4 x M3 10mm machine screws
1 x M3 35mm machine screw
5 x M3 hex nuts
2 x M4 45mm machine screws
2 x M4 hex nuts
1/8" thick neoprene weather strip (or similar) https://www.amazon.com/dp/B07WNSH1VR

Assembly video: https://youtu.be/9i542BML7v0