Rebel Lightsaber wall mount

I made this lightsaber wall mount for a nice decorative piece that can be used to mount your lightsaber to the wall. I printed it in PLA+ and I increased the infill to 85% at the weakest point as represented by the block in the screenshot form Cura. To do this I set my infill density to 85% then I put a support block on the model where I wanted the infill to be lower in order to save material and print time. Then, you can select the per model setting button on the left side and can modify settings for intersections and change the infill to whatever you feel comfortable with, I used 15% infill.

Content of which this design is based is owned by the mouse. :)

I am a new college student and if you find any of the things I make useful please leave a tip. All tips will go into my college fund. Thank you!
Check out my LinkTree here: https://linktr.ee/westinspace