Mini Tiny Travel Salt Shaker | Salzstreuer

A tiny salt shaker, holding about 15g of salt.
The lid rotates, so the salt cannot escape when it is e.g. in a backpack.

The lid needs to be printed separately and pressed onto the shaker, which takes a bit of force - I used a metal rod with the right size, but it is certainly possible to use something else, like a wooden dowel or even print a special part.

The design is based on a mini salt shaker I once got after a tour at a salt mine

I printed it in draft mode (.3mm) on a Prusa i3 mk3 (Standard .4mm Nozzle) with ~0.2mm layer height in the area of the top (though this is probably not necessary)

Feel free to change the design: https://cad.onshape.com/documents/10bb4dcc3ffe529372dd043e/w/bc16d67fc56738ed271acfb2/e/3fbb63faa86a4f6a1a93627e

If you printed this be sure to post a make - I'm looking forward to see how your's turned out!