August 20, 2025
Description
Update 15.02.2026
-> new part, new files, 100% infill PETG
If you want to test it on a current MILK shaft head please use the "Used Head" spacer (holes are likely to be a bit bigger on these)
If you want to test it on a new fresh head, use "New Head" spacer, holes are tighter.
-> You will need to source a 20mm M6 screw
Tested with standard PLA
0.2 layer height
at least 100% infill
License:
Creative Commons - Attribution - Non-Commercial
quentinbailat
