Bangle.js 2 detachable charger with stand

Warning!

The polarity of the connector depends on magnets' polarity. Wrong polarity will damage you watch
Correct polarity is shown here

I lost my Bangle.js 2 charging cable.
so I took Bangle.js 2 Dock Watch Charging Stand by tinx as base and redesigned the charging adapter with a portable part attachable to a wall mounted stand.

BOM

• M3x10 [DIN965] screw
• d6x2 magnets
• Type-C connector on a small PCB like this
• Pogo pins connector 4 pin.
• 24AWG silicon wire (black and red)
• 4.2x16 self-tapping [DIN968] for mounting

Notes

This charger can only operate properly with Type‑A → Type‑C cable (Type‑C → Type‑C will not work).
The pogo pins connector spans 7.62 mm from the leftmost to the rightmost pin. I bought it from a local store so I don't know the part number, tho I saw similar one on AliExpress