GIGAPARTS POTA 20 - Mast Mount for Molle Gear - REMIX

Remix of Molle Granade Holderby NoX the FoX:

What did I remix?

UPDATED 08/03/2025 - KC3WOA added two squeeze clips on the Molle mount of this project. Locks the POTA 20 mast holder into place (See video). This makes it so the two parts do not need to be glued together. I will try to do a better job (soon), explaining. This is KC3WOA's V1, which will be updated in the future.

Nox the Fox was kind enough to provide this free for remixing. I will be happy to also change the ID of the mount, so it fits your mast, I just need the OD of your bottom section of mast. ALL CREDIT should go to NOX THE FOX, I just like pulled a wall out or something.

I printed with the following settings:

ASA Filament, 6 outer walls, 80 percent infill, Both objects were printed like in the attached photo. see attached photo, like my youtube page, I am sucky. Maybe consider using PA12 or PA-CF with 100 percent infill.

Bambu X1C.

Hey, I have a really SUCKY youtube page and it's been EVEN Suckier lately. Can you subscribe or something? If not, cool. https://www.youtube.com/@DudeTested/