Bathroom / Toilet Paper / Practical Shelf

This is a very practical and useful print to hold toilet paper rolls, with a cellphone shelf and a drawer to discreety store womans goodies.

Prints very easy with NO SUPPORTS, preferably in PETG. I used a 3mm brim, 0.6mm spaced, also draft-shield 2mm high and 0.8mm away from the model to help prevent elephants foot.

The roll-holder is attached with a M5 countersink screw 16-20mm long.
To mount I used two existing holes in the wall, 44mm apart. Should be easy to add alternative mounting holes in TinkerCAD or other software.
Printed with eSun Basic PETG Silver with a 0.5mm nozzle and 0.24mm layers. I used 15% infilll with 1mm walls and altenative extra wall. The whole thing is quite ridget and strong. The little drawer-handle is attached with three M3 x 6mm screws. It is supposed to fit tight when pushed closed, "locking" the drawer in place. If too thight, just trim the left and right ever so slightly with sand paper or a file.