September 4, 2025
Description
Fully stackable Gridfinity compatible bins. No supports required for printing. Designed for our grid setup to sort hardware at work.
They have an angled face for labels to be applied, and the heights are adjusted slightly so when stacked they are all the same height. There is a cutout in the back for increased visibility of the label for the bin behind.
Designed for 12mm wide labels, 35mm and 70mm lengths work well if your label maker can be programmed for that.
*** UPDATE 3.18.2026 ***
Added configurations for 2x2 and 3x1 bins. These versions are still stackable and require no support.
License:
Creative Commons - Attribution - Non-Commercial
HunterK55
