shower curtain rod holder

This is a bracket for a 25 mm curtain rod made of TPU. To avoid drilling a hole in the bathroom wall, it is designed to rest on the edge of the tiles. I prevented lateral slipping with a small nail, for which a hole is provided in the bracket. The length of the rod should be chosen so that the two brackets at the ends are pressed against the walls.
Because the bracket is flexible, the rod can be clipped in from above.
A simple aluminum tube with a diameter of 25 mm from the hardware store was used as the rod. With a wall thickness of 1.5 mm, the tube is very stable even at a length of 2 m and can easily support a shower curtain without bending.

No supports are needed for printing.