GPU support for NZXT H9 Flow (2025)

UPDATED with second option on 2025-12-26: There is a second model shaped like a flying buttress to allow clearance around thick 140mm bottom case fans. The new model uses a 60x10x5mm neo magnet in the bottom. Obviously do not use this around spinning disks, and be careful to position it correctly back near the angled case fans.

First model is recommended if clearance is not an issue.

---

This model is sized for the MSI Suprim RTX 4090, and stands 91mm high.
It straddles the lower fan area, and contains angled vanes to minimize airflow blockage.
You can measure the height you need, then resize the Z axis in your slicer as appropriate.

This piece does not interfere with 140mm or 120mm fans installed in the bottom area.

Not meant as a rugged fixed piece that will hold the GPU during travel - it's a lightweight item for stationary installs.

Designed for the 2025 model NZXT H9 Flow case - no guarantees that it fits other cases!