Caliper Storage Case - Print inplace, no support, single extruder

Brief

A simple thin storage box for your caliper.

The monochrome version of the box prints in a single pass without supports. However, the inner parts will need to be printed separately. The bi-chromatic version prints in two passes using the "Multi Color With a Single Extruder" technique.

print instructions for bi-chromatic version

For bichromatic print on single extruder, I use this technique : https://www.youtube.com/watch?v=D7FiT5VqLSg

1. you might check the video to setup the z-hop or retraction (my printer does not seem to care about it though)

2. in cura, load both "box - shell-white-1.STL" and "box - shell-black-1.STL"

3. select both models, right-click and and merge

4. translate to x=0, y=0

5. right-click again on the model and "ungroup models"

6. delete black model and print the white one

7. Redo steps 1 to 5 , but delete white model this time.

8. then print "box - inner-bottom-1.STL" and "box - inner-top-1.STL"

9. just insert the inner parts inside the box. You may use some drop of glue to secure it in place.

print instructions for mono-chromatic version

1. Just print "box - shell-monochrome-1" .
2. then print "box - inner-bottom-1.STL" and "box - inner-top-1.STL"
3. just insert the inner parts inside the box. You may use some drop of glue to secure it in place.

last word

Let me know in the comments if you need adaptation to your caliper.
I also provide a "box - inner-template-1.STL" as a template if you want to remix the box to other purposes.

Have fun.