Storage box for 1/4" screwdriver hex bits

Storage box for 1/4" hexagonal screw bits.
Print in place, no supports required.

bichromatic

For bichromatic print on single extruder, I use this technique : https://www.youtube.com/watch?v=D7FiT5VqLSg

1. you might check the video to setup the z-hop or retraction (my printer does not seem to care about it though)

2. in cura, load both "drillbox - box-black-1.STL" and "drillbox - box-white-1.STL"

3. select both models, right-click and and merge

4. translate to x=0, y=0

5. right-click again on the model and "ungroup models"

6. delete black model and print the white one

7. Redo steps 1 to 5 , but delete white model this time.

8. then print "drillbox - inner-3.STL" .

9. just insert the inner parts inside the box. You may use some drop of glue to secure it in place.
   print instructions for mono-chromatic version

monochromatic

1. Just print "drillbox - box-1.STL" .
2. then print "drillbox - inner-3.STL"
3. just insert the inner parts inside the box.
   You may use some drop of glue to secure it in place.