Ferrari F1 Steering wheel (Logitech G25 base)

NEW VERSION http://www.thingiverse.com/thing:1513508 (NOW OSW COMPATIBLE)

Complete F1 wheel to replace the original G25.
Second version of other wheel made time ago.
The hotbed in my prusa I3 is a 20x30cm now and is possible to made the body and cover parts complete.
Even the body and handles fit!!
In the first one with a default 20x20 bed i split them in two.
If i found the olds STL´s i promise upload them.The images with the wheel finished are from this version.
I use a quick release from http://simulaje.blogspot.com.es/ to change the rims easily for other tipe of car (i like rally games too:) but the wheel could be mounted to the G25 base permanently with the original screws if you plan to drive F1 cars only.

CHECK FOR UPDATES!!!

---

19/03/2015
Added new cover version CoverF15Fullv2.stl with a recess of 0.5 mm to put the tags of the rotarys.

17/03/2015
Uploaded repaired file BodyF15Full_repaired.stl with the nuts to fix the cover in the correct place (back)and some errors in the stl removed.
PLEASE DOWNLOAD THIS.
17/03/2015
Uploaded another version of the body and handles,F15Plano.stl and ManetaF15Plano.stl.
Every handle comes in two halves,so 4 parts required.
Print 2 as is and 2 mirrowed.
If you want to apply Plastidip easily use them.You can hot glue them together with the body.
The part CoverF15Full.stl is compatible with this version.

12/03/2015
New version of the knobs uploaded!!!
knob_ferrari_v9.stl with a hole to slide a m3 nut.I use v8 before without a nut since the screw only fix OK.Better solution instead.
Drill he hole with a 3mm bit.
knobv8.stl clean from holes in the shell.I printed v7 the first time with no problems,but just in case.

11/03/2015
New files uploaded!!!
Cover and handles now 0.5 and 1mm tighter.Easy to put together with the body(Less file time work)
11/03/2015
Added some images of the previous model and some of the printed pieces of the V2.
11/03/2015
Uploaded a full body (BodyF15full.stl)with the handles attached.REMOVED
File with errors.Download the new file repaired.Sorry for the inconveniences.*

A 20x30 bed is needed.A new cover (CoverF15full.stl) uploaded too.