Blum Compact BLUMOTION 86 Degree Restriction Clip Blum 38C315B3 Reproduction

This clip is used to limit the motion of the Blum Compact Hinges (several kinds).

The photo shows the original clip on the left, the reproduction, and an installed reproduction clip.

Note that you should print this with a 0.25mm nozzle using high quality settings on your slicer.

The model was made using SAE measurements, so it may need to be converted to metric for your slicer (2540%). Orca senses this and changes the measurements with a click on a dialog box.

Ensure the clip is locked in place by pressing firmly on each side of the base with a small screw driver.