PEGOR offers a lightweight, scalable, and versatile wall mounted organizer for light items, like jewelry, craft supplies or small hand tools. Create a perfect storage and expand it as needed.
⚠️ Pay attention to printing instructions.
Note: The 3D-printed tiles are very light, I recommend using an adhesive double-sided tape at the bottom to prevent shifting or rattling. This adhesive only stabilizes the board, hanging bracket must bear the vertical load.
Features
- Compatible: 25mm (1in) hole spacing - compatible with pegboards and accessories, including edge-to-edge pegholes.
- Modular: only 2 tile dimensions 4x4 10x10cm / 4x4in and 8x8 20x20cm / 8x8in make any size board.
- Interlocking: tiles have regularly spaced interlocking slots on their edges.
- Threaded: M6 thread in every hole. No need to use them, use as regular pegboard. 3d printed M6 bolts included in design files set
- Tool-less: Dovetail press-fit connectors are hand installable and removable, no tools required.
- Efficient: 5.36m/16g for 4x4 tile (= 0.6m2/6.5ft per 1kg roll) and 17.4m/53g for 8x8 tile (= 0.75m2/8.1ft2 per 1kg roll).
- Hang-able: Two hanging brackets included in design files set.
Printing Instructions
- Wall Generator: Classic (some slicers default to ⚠️ Arachne, which sacrifices XY accuracy ⚠️→ poor fit on dovetail connectors)
- Material: PLA or PETG for tiles, PETG for connectors, brackets and bolts
- Supports: no
- Nozzle: 0.4mm
- Layer: 0.2mm
- Wall Loops: your slicer default, I use 2
- Infill: your slicer default, I use 15% grid
romgar
