November 7, 2025
Description
!USE AT YOUR OWN RISK!
Recommended to be used with fire retardant plastic, or coating. Recommended to be used with higher temperature filaments (PLA is probably a bad idea) DO NOT USE CONDUCTIVE FILAMENT
Basic wiring and soldering skills required
I made this design for an 8way C13 outlet for a 10" rack after a DM request from a user KrickyKiki.
I haven't tested it yet, but it should work.
There is ample room for wiring and clearance.
Print "10''_rack_C13_main_8way.stl" and at least one of the backs depending on what are you going to use.
Should be printable as a single piece in any printer with a bed of at least 220x220mm if rotated by 45 degrees, supports are built in.
Parts:
2x 4way C13 blocks
6x M3x5.7 heated inserts
6x M3x10 countersunk machine screws
1x C14 or M12 gland for input
1x M12 fuse holder [optional]
1x Power switch (DPDT) [optional]
License:
Creative Commons - Attribution - Share Alike
atanasovgoran
