November 9, 2025
Description
After changing the starter on my 2017 Jeep Cherokee Limited - 2.4L I noticed that one of he grommets was missing from the engine cover.
Mopar doesn't list a part number for this particular application.
The ball on the engine is 10mm in diameter.
Printed in TPU. No more than 2 perimeters and light on the infill. The OEM parts are pretty soft - this comes out kinda stiff in TPU 95A (I printed with 2 perimeters and 30% infill, NO SUPPORTS NECESSARY if you print is large side down.
It looks a little strange around the inner opening in the photo because I put a bead of O-Ring lube on it to make sure it went on and off smoothly.
License:
Creative Commons - Attribution - Non-Commercial
north_of_55
