March 22, 2015
Description
This is an indicator light for your bicycle or motor cycle. The light contains one LED, so need two of these to indicate both directions.
The design is made such a way that any rain falling on it is guided away. If there is any condensations inside the light, it can drip out. It is important that the light is mounted with the correct side up. The screw holding front &back and the wire exit are located on or near the bottom side..
The light has a back and front that hinge together at the top, and are hold together with a screw on the bottom.
In the STL download you find 4 variants of this light. The difference is where the wire enters the light: either side or bottom and left or right
The variants are thus:
The LED has hardly any cooling , so it can only be turned on a short time like an indicator function. It cannot be turned on for longer time because it will overheat quite quickly. So don't use it as rear light or so.
License:
Creative Commons - Attribution - Non-Commercial
wingmaster
