Chonka Dump Truck

ATTENTION: Front Bumper needs additional walls/infil as the hinge where it attaches to the body can shear off with a decent drop from height. (the hinge pin remains intact though)

Uses around 1.5kg of filament (depending on settings possibly a lot less).

• Designed to fit on a 250mmx250mm build plate (the tray is 245mm long in one direction.)

I printed in basic PLA, reccomended in PLA+ or PETG.
Great thing is if you or your kids break it parts are super easy to replace.

• All parts are 3d printable and designed with strength in mind.
• Most parts are snap fit or threaded requiring no glue. (I used super glue on all joined surfaces for extra strength)
• Some parts require super glue otherwise there is a risk they come free

Assembly guide on the way

Part list

Wheels x4
Axle large x2
Axle caps x4 and x2 and x2
hex tray x4
hex axle x2
Otherwise all parts require only one copy.

Front logo is at 80% all other logos are at 100% (They aren't required to be printed but fit in their spot really easily and finish the look)