November 23, 2025
Description
This is a replica of the Knight's Sharpened Nail from Hollow Knight. Fully assembled, it'll be 42.3" long which I designed to match my 6' height. The pieces do require a rather large print area.
In addition to the parts, you will need the following items for assembly:
I purchased mine from Lowe's and this is the BOM:
| Part | Item | Cost | Quantity | Link |
|---|---|---|---|---|
| Madison Mill 0.375-in dia x 48-in L Round Poplar Dowel | #19380 | $1.48 | 1 | link |
| Madison Mill 18 -Pack 0.375-in dia x 2-in L Oak Dowel Pin | #81603 | $1.74 | 1 | link |
| Madison Mill 26 -Pack 0.25-in dia x 1.25-in L Oak Dowel Pin | #81601 | $3.17 | 1 | link |
Additionally, you'll need some form of surfacing (I used Bondo), adhesive (cyanoacrylate/super glue), paint (I used some metallic gray spray paint), and sandpaper (60 grit was fine as I wanted a rough finish).
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
theprankmonkey
