Mini Monitor Case with Powerbank

Since the start of my homelab, I required multiple times to have a small, portable "one hander" hdmi display. I purchased one from AliExpress, but it wasnt so great. 
So I made a DIY one, with a powerbank. 

The screen is a 7 inch multitouch capable 1024x600 from AliExpress
https://www.aliexpress.com/item/1005007432461342.html
The Powerbank is a cheap and small, 5000 mAh 12W one from Alza (it does not need to be strong, the screen uses little power and low voltage)
https://www.alza.hu/alzapower-onyx-gen2-5000mah-12w-feher-d12907560.htm

All screws M3. 

I made several rounds of prototyping bits and pieces, parts, then for the final print, i was lazy to tune in the settings perfectly, the "quick and mid" quality was fine for me. 

I uploaded the f3d file if you want to tinker with the model, and the 3df to quick printing. 

It consists of 4 parts, the Top and Base is holding the screen, and one for the powerbank. There part between the base and the powerbank holder is not required (I havent printed it at the end)

Made out of PLA, 0.2mm, 25% infill, 3 wall layer. Support was only needed for the powerbank internal part (just to be safe)