Desk Micro + SD Card + USB Holder, Angled, Detachable

##Happy New Year All!

I could not find a USB storage holder that would fit all the SD cards and USB sticks that I have, so I made the one I wished I had. This sits on the side of a desk, and the main storage section is detachable for easy access. I am using a command strip to secure it to my desk, which works great for me but I'm sure a variety of solutions would work great (double stick tape would also hold well). The two pieces of the device are held together with dovetails, which slide apart quite nicely.

This device holds:

• 27x USB-C
• 28x USB-A
• 24x SD cards
• 46x Micro SD cards

I threw the .f3d file in here as well if someone wants to play around with it and add more spots or make it custom, I used parameters throughout the design so it shouldn't be too hard to edit. All the USB slots were done in a single sketch and I use the pattern tool for them, so if you go to edit that one sketch and double click the little pattern tool constraint next to each pattern, you can add/delete USB or SD slots. Then you would just need to adjust the overall size using the parameter menu in fusion.

I printed with PLA, 2 walls 10% infill, 0.20mm layer height @ around 300mm/s on Bambu Lab X1C. I'm sure almost any filament would work well enough for this, as it doesn't require high strength.

Happy printing all!

-Wy