Axglo V2 Umbrella Holder

Printing Recommendations
ABS to maintain strength. Infill of about 20-40% should suffice, using a layer height of 0.2mm and 0.16 for the smaller items.

Assembly Instructions

Need 2 x M12 x 30mm ( 35 - 45 may work, but would suggest that a spacer be used for the main bolt to frame) Hex Bolts for this design. Designed it around the Axglo V2 trundler.

I have added Dimensions to illustrate and maybe it may fit other trundlers. Have done a couple of test prints to get the tolerances right on my printer. Yours may vary.

Improvements are welcomed.