Ultimate64 / CU64 / console x Breadbin

this is a console for the barebin , no glue no modification to che chassis , simply put the bracket into the hole nearby the crt .

parts :
num6 screws m2.5 x 10 mm
num1 4 pin connector https://www.amazon.it/dp/B0CBWZNP6Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
num1 4 pin cable https://www.amazon.it/dp/B0CSZ7ZRDC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
num 3 buttons https://www.amazon.it/dp/B0DQPKQMLV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
num 3 wire connector red https://www.amazon.it/dp/B095PGVNF8?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

3 buttons ground shorted and connected to the ground pin ( first of four sitting in front of MB )

print :
PETG , use support and look at the picture how dispose the pieces .

the connector for the original barebin (1982) is different due to the shape of the hole that is higher than the new one . the connector for that model is :
-connettore_breadbin_1982.stl
the connector for the c64c case is :connettore_CU64C.stl

c64c parts are :

Uc64c-L.stl
Uc64c-R.stl
ultimate_c64c.stl

video barebin here
https://youtu.be/Hz429b2czn8?si=k9-xTt_Vy0VxnPtn