BTT Eddy DUO mount for Creality k1 MAX

BTT Eddy DUO Mount for Creality K1 Max with or without CFS

This mount replaces the original LIDAR unit on the Creality K1 Max and uses the same dimensions, offsets, and screw positions as the stock mount. The original screws are reused. all you need is 2 small self‑tapping screws (M2×5) and the BTT Eddy DUO

https://biqu.equipment/products/bigtreetech-eddy

The LIDAR cable must be rewired and soldered to match the BTT Eddy DUO pinout.

For firmware setup and configuration, see:

• Creality Helper Script Wiki: https://guilouz.github.io/Creality-Helper-Script-Wiki/
• K1 Max Klipper + Eddy DUO project: https://github.com/mikeinredding/K1Max-Klipper-Eddy

It should be printed in a heat‑resistant material such as PETG, PETG‑H100, ABS, ASA, or PC, as the mount is located close to the hotend.