The spool is fixed on a new corner bracket.
The filament sensor is attached to a new rotating support.
There are 4 files to download:
Relocation corner: This new corner has holes to bolt Creality spool support. You will need two M5x'12 bolts and two M5 nuts. [this is for enclosures that has 8mm diameter rods]
Base, joint and pin form new filament sensor attach point.
Base: Print with pin horizontally for more strenght [with supports] smooth pin after print for no binding movement.
Joint: joint goes on pin. The side hole is for a M3 thread insert [this will be the original creality bolt and bushing]
Pin:print two of these horizontally. They attach joint on top of base. Use a small dab of superglue to hold them in place.
Mod 2: Screen relocation
In order to move scree to outside the enclosure, you will need a longer cable. This cable can be foun easily on your prefered marketplace.
The new screen support stays inside enclosure and bolts cross the tissue to fix original creality support outside (yes you will need to make 3 small holes on tissue for bolts).
This screen support has built in places to conveniently store creality OEM tools and the special bed scraper also provided on same file.
You will also need to do a hole on enclosure where screen cable will go. There are a special TPU gromed to cover this hole.
Extras
Plier support
Hygrometer / thermometer support
Nebula camera support [for this incredible support https://www.thingiverse.com/thing:6888123]
Obs.
do not print in regular PLA because enclosure can reach around 50 celsius!
compatible nebula pad cover: https://www.thingiverse.com/thing:7027166
Cascao
