January 11, 2026
Description
This is rhino model that requires manual assembly, capable of limited articulation after assembly, though the rhino does not have many possible display poses.
Print Settings
Layer height:0.2mm
speed:200mm/s
Need support
5% infill , 3 walls
Print Time : ~5 hours
Recommended to use PETG for printing.
If the joints are too loose, adjust “X-Y contour compensation” to 0.05 ~ 0.1. If they are too tight, adjust it to -0.05 ~ -0.1.
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
Robot3dart
