##🍯 Winnie the Pooh - Enchanted Lamp
Bring the warmth of the Hundred Acre Wood into your room! This Winnie the Pooh bust is specifically optimized for 3D printing as a decorative lamp or a high-quality display piece. It features smooth organic curves that look stunning with silk, matte, or translucent filaments.
🛠 Recommended Print Settings (SEO & Quality)
To achieve a "store-bought" porcelain finish and save filament, please follow these specific settings:
💡 Hollow Strategy (Important)
- Wall Loops / Line Count: Set to 4 or 5. This creates a sturdy 2mm+ outer shell while keeping the interior empty.
- Infill: Use Lightning Infill at 10-15%. This supports the internal ceiling (top of the head) without wasting material.
✨ Surface Quality
- Outer Wall Speed: 40-60 mm/s (Slower speeds ensure a smoother, high-end finish).
- Travel Speed: 200 mm/s or higher (Crucial for high-speed printers like Flsun SR to prevent stringing and "black burn marks").
- Layer Height: 0.16mm or 0.2mm for the best balance of speed and organic detail.
- Supports: Tree supports are recommended only for the chin area if your cooling is insufficient.
📥 How to Hollow in Your Slicer
If you want to use this as a lamp, you must hollow the model:
- Orca Slicer / Bambu Studio: Right-click the model -> Hollow -> Set Offset to 2.0mm.
- Ultimaker Cura: Set Infill Density to 0% and Wall Line Count to 5. Enable "Infill Support" to safely close the top of the head.
Tags: #WinnieThePooh #Disney #3DPrinting #Lamp #NurseryDecor #FlsunSR #BambuLab #Hollow #LEDLamp #Cute
alionurozdemir
