Liquor-Filled Chocolate Barrel For CocoaPress

This remix of the "Wooden Rope Barrel for Gloomhaven" for the CocoaPress printer that adds a hollow interior cavity that can be filled with liquor or other beverages. Pause the print about 1/3 through and use a pipette or syringe to fill the hollow space. The interior cavity has a tapered top, so that it can be printed without supports.

The SCAD file is not needed, and I am only including it to demonstrate the technique I used to carve out the hollow interior from the original STL file. It requires the "Barrel_-_Flat_Bottom_V2.stl" file from the original design. The same technique could be used on other models.