Case for NanoVNA (2.8")

I decided to print a case for NanoVNA, so as not to store it in a cardboard box. The case consists of 2 parts. At the bottom we have the device itself, 3 probes and there is a niche for adapters. In the upper part, I made retainers for coaxial cables from the kit. To prevent the case from opening itself, I put magnets with a diameter of 5 mm and a thickness of 2 mm. A nail with a diameter of 2 mm was used as the hinge axis. I just cut it to length. I printed the cover in two colors, after a pause on the 8th layer. I changed the filament and then the seal again. It turned out, as it seems to me, not bad. The Petg material.