SETI Insert with Space Angecies Expansion

This is an insert for SETI, including the Space Agencies Expansion in the main box (finally).

Unfortunately, I had to redesign a lot of it to fit everything, so there will be a lot of printing, even if you already have the base game insert from me. Apologies if this is confusing, I'm trying to provide options for different printers and preferences.

Instructions:

1. Choose the "Space Layer" depending on the size of your print bed. I used Super glue in the puzzle joints to make sure the pieces stay together.

   • Large Bed: Print SpaceLayerExpansion.stl
   • Medium Bed: Print SpaceLayer1_Exp.stl and SpaceLayer2_Exp.stl
   • Smaller Bed: Print SpaceLayerA_Exp.stl, SpaceLayerB_Exp.stl, SpaceLayerC_Exp.stl, and SpaceLayerD_Exp.stl

2. Chose the Card Tray you like best (See Notes below).

   • Print the MainCardBox_Exp.stl
   • (Optional) Print as many CardBoxDivider_Exp.stl as needed.
     OR
   • Print OptionalCardStack.stl (This is the old card holder)
   • Print OptionalCardSpacer.stl

3. If you have the old Player boxes and lids, keep them, otherwise print 4 of each.

4. Print Resources_ExpX2.stl twice.

5. Print everything else not mentioned here, once.

6. Print the Tech Tile holder from W1mL33na3rts remix of Stoniac's design, which can be found here: https://www.thingiverse.com/thing:6814458

7. (Optional) Print the Alien and Solo icons in the fun colors to get the look of the alien boxes in the old insert, and glue them into the obvious spaces on the card boxes.

Supports are generally only needed on the Alien Card Boxes, since they're printed vertically, and there's a hole cut out of the bottom.

Notes:
I redesigned the card holder to be able to fit more cards in general. So maybe it'll fit sleeved cards, maybe it won't. Let me know if it does, but I am not going to try it because that's a lot of sleeving. I've also tried to make the alien card boxes a little wider than they need to be to help account for sleeves, but again, I haven't tested them so it might not have helped.

I've also put the Quick Start cards in the main card holder, using the divider to separate them from the big stack.

The Oumumuamua board piece should fit on top of it's Tray, using the little cutouts in the rim. See the pictures.

The extra large solo tokens are tucked in with the solo cards, but if there's no room because of sleeves, maybe try putting them in the MainCardTray.

For my returning printers - I've tried to keep the new files using the _Exp tag, and the old files without it.

As with the old insert, this uses the Tech Tile holder from W1mL33na3rts remix of Stoniac's design, which can be found here: https://www.thingiverse.com/thing:6814458