Filament Dessicant Holder with Snap-Fit Caps.

Decided to get a bit more organized with all of the filaments I have laying around so I purchased some 4-mil 12x12 bags and created this little container to hold up to something like 1/2 cup of desiccant in the center. This is NOT designed to fit super tight but more like a universal container for whatever you need. It can, of course, be printed out of anything but if you can, I recommend ABS as with that, you can just drop the whole thing a convection oven at 170 for a couple of hours to recharge. If you need to use PLA or PETG, you'll want to pop one end off and dump the contents on a sheet pan. Goes much faster that way. Of course, if you have a good temperature controlled dehydrator, it matters not.