Demogorgon Spawn V2 (DND / TTRPG)

👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐
If you like my models then come follow and support me on Patreon - where you'll get access to exclusive models.

*Mar 5 update - I added some make photos from printing the mini on its back at -50 degrees on the x axis and then tilting on the Y-axis slightly to avoid supports on the head - this was done with a 0.3mm nozzle at ~0.2mm. It prints OK on FDM but I included a photo of the thumb that snapped off. In this V2 version I made the hands and head quite a bit bigger but one moment of carelessness and he lost a thumb. It's a big enough piece that I should be able to superglue it back pretty easily. I'll update again once I have it painted. I also have two more poses in the works that I might add here or on Patreon. The 32mm version might be doable on FDM as well but it'll get harder to manage the fingers.

Today I've updated my Demogorgon Spawn mini. This time I made it entirely by hand over a 4hr modelling session. I didn't create as many variants but it is fully rigged so I might still add a few alternate styles in the future. I went a little overboard maybe on the sculpting and borrowed maybe too heavily from a Xenomorph / Guyver etc... but I think this new one looks super neat. I've added pre-supported files for this on my Patreon and added pre-supported files for the older version to Google Drive (for paid patrons - it's too many files otherwise and I think Patreon might cut me off!).

As I mentioned I made this model by hand and livestreamed it - I'll share that VOD here when it's done.

You can see the timelapse of the VOD here:

https://youtu.be/g5UCK7jBFlo

You can get the pre-supported files on my dedicated Demogorgon Spawn page over here. These pre-supported models are free (for now) so if you like them then download them while you can - eventually I might move them to Google Drive we're they're only available for paid patrons. Just note that the other spawn models were made with an AI base mesh as a starter and then sculpted / posed in a similar fashion to this one.

The new version just has a 25mm variant and 50mm variant but it stands 75mm stall on that 50mm baseplate. It big.

Aside from it being handmade I think I've improved on the overall quality of the model by increasing the size of the hands and head significantly. This should make the teeth more apparent on the 25mm medium version and and especially so on the 50mm variant. For the pose I've tried to match the reference art fairly closely too.

For printing via Resin as I mentioned above there are pre-supported files here. For FDM you can print on his back at -90 degrees on the X-Axis. I'll share my test print / make when it's done.

You can follow along with me on Patreon here to get sneak peaks at my upcoming projects, exclusive minis / models and more!