Props 3D Dredd 2012 Lawgiver Thicker Side Plate V5 - Mag well lips - Jig to drill barrel

I redesigned the right side plate, which may be screen accurate on this model, but is way too think and easily cracks after sanding. This version is 1/8" thicker from the outer wall inward towards the Lawgiver.

The v3 file has a wider edge for more surface area to secure to the Lawgiver.

I also created two magwell lips to go on the inside of the front magwell area, to be seated against the magazine. These conceal any gap between the magazine and the Lawgiver. Two different sizes are available.

Additionally, these aluminum tubes are the perfect size for the barrel. No lathe required, just cut to 61mm and holes drilled and Dremeled:
https://www.amazon.com/dp/B0F5GR662P?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Finally the block is a jig to use with a drill press to cut the holes in the barrel.