OpenSCAD Tires

This design lets you use the OpenSCAD Customizer to generate tires that would typically be printed with TPU. These are intended to work with the wheel rims that can be found at https://www.thingiverse.com/thing:7316286, which allows you to create gears and pulleys... where a pulley can be alternatively purposed as a wheel rim. These are intended for use in RC and robotic projects.

Purposely no STL files are provided here, as you can customize your own.

If you define a wheel rim (pulley) of a given radius, you want that to match the inside diameter of the tire. You also want to define the shoulder height (i.e. rim height) for each to be the same, typically 1mm so that the tire can be put onto the wheel without too much trouble and so it won't slide off. You also want the width of the wheel to be the same as the inner width of the tire.

Note that you have control over the tread pattern and depth, where potentially more tread patterns will be defined in the future.