March 31, 2026
Description
Rear fender for children's bike Woom 1.
Mounted on seat post. Can be used also with lowest seat position.
Divided into two parts - holder and fender. They are connected with two M3x10 screws.
I recommend printing the holder with at least 3 perimeters so that it is sufficiently rigid and does not wobble. I do not recommend PLA due to its fragility, ideally PETG or better.
On the contrary, the fender could be as light as possible, 2 perimeters of PLA is sufficient here.
License:
Creative Commons - Attribution - Share Alike
Sharker487
