April 5, 2026
Description
This is a quick release mount to attach a Elecrow ThinkNode M1/M5 to 25mm webbing.
Build notes
You will need two M2*4mm hex bolts to attach the back plate to the device.
PETG is preferable to allow for a bit of flex on the release tab.
Sanding may be required if the fit is too tight.
License:
Creative Commons - Attribution - Non-Commercial
cracked_atom![Resistor Box [Stackable & Customizable] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/a6/9d/ec/ab/9f/20180928_184415.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/a6/9d/ec/ab/9f/20180928_184415.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "Resistor Box [Stackable & Customizable] preview image")
