Native Deodorant Pusher - for the 100% Plastic Free Container

This is Version 2 of the design. It adds a 'Jam-Nut' that clamps the Cam-Nut to the bottom of the deodorant container.

Native brand deodorant is sold in a '100% Plastic Free' container that has NO PLASTIC TWIST WHEEL. You push the deodorant up manually using the CARDBOARD BOTTOM DISK. Manually pushing makes it more difficult to smoothly push out small amounts of deodorant than containers with the plastic twist wheel.

This 'Native Deodorant Pusher' makes it easier to smoothly push out deodorant with the Native 100% plastic free deodorant container.

HOW TO ASSEMBLE: (see photos)
--Place the Native deodorant container on table, top side down.
--Place the Foot in the open end of the deodorant container with the flat side down.
--Insert the Cam-Nut into the open end of the deodorant container with the 'tabs' inside the container. Rotate the Cam-Nut 90 degrees so the tabs are held in place by the inside of the container.
--Screw the Jam-Nut, small boss down, large disk up, onto the Cam-Nut. Tighten the Jam-Nut SNUG against the end of the deodorant container. The Jam-Nut prevents the Cam-Nut from rotating.
--Screw the Knob into the Cam-Nut until it contacts the Foot.

Parts are printed with PETG and no support.