Lucario Bookmark

This build plate is tuned for strong white filament to prevent blending and achieve clean color separation. A second build plate is included for weaker white filament, but it hasn’t been fully tested—adjustments may still be needed.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.7x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 1.2mm and the Actual Thickness is 1.2mm

#080a0d PLA PolyLite Black  Transmission Distance: 0.3
#00358e PLA BambuLab Basic Blue  Transmission Distance: 4
#8bd5ee PLA BambuLab Matte Ice Blue  Transmission Distance: 3.5
#eaecf5 PLA PolyLite Pro Cold White  Transmission Distance: 0.5

This print uses 4 unique filaments

Build plate one Strong White

Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Blue
At layer #7 (0.64mm) swap to Ice Blue
At layer #13 (1.12mm) swap to Cold White for the rest.

Build plate two Weaker White untested

Swap Instructions:

Start with Black

At layer #2 (0.24mm) swap to Blue

At layer #6 (0.56mm) swap to Baby Blue

At layer #7 (0.64mm) swap to Opaque White for the rest.

Setting

Layer height: 0.08

Initial Layer height: 0.16

Wall: 2

Sparse infill density: 100%

Sparse infill pattern: Rectilinear

Turn Off Prime Tower