Hexagonal Modular Spray Paint Can Organizer - Rexmix

I shortened the hex ring from 14.97mm down to 7.0mm and added hexagonal holes to save on material.

File descriptions

hex-can_1x_7mm_w_holes.stl is the modified hex ring.
hex-can_2x_7mm_w_holes.stl is a pair of hex rings fused together for added stability.
hex-can_2x_7mm_w_holes_taper.stl is the same as the above with a tapered inlet.
hex_stopper_7.5mm.stl is a cap for the rods to provide stand off from behind the rack. This helps keep the rack for moving into the wall when inserting cans.

Other files

My printer did not like printing the rods vertically. I had better luck laying them down in an "I-Beam" configuration. They are rotated in the STL so I don't have change the rotation in the slicer.

I added a 120mm length as 150mm was too long and 100mm was too short for some cans.

Everything should be compatible with Thingiverse item 4917126.