Caps (TPU) for 8in1 charging cable (Deans/T-plug, XT60, Tamiya Mini, TRX, EC3) and XT30 F

I've bougth SKYRC B6neo 2 charger (awesome thing!) that comes with 8-in-1 charging cable and was shocked that the cable does not have any caps so it is very easy to short curcuit when charging batteries.

So I modelled caps for most of the cable's the connectors:

• Deans/T-Plug (Male);
• XT60 (Male);
• Tamiya Mini (Male?);
• TRX (Male);
• EC3 (Male);
• Bonus: XT30 (Female) -- that is on batteries I use.

The caps are designed to be printed in TPU only and they will not fit if printed in PLA/PETG/etc.
If on your printer the caps are too loose/tight -- just scale it in sliced in XY.

STEP files included.

I printed from Orca Slicer and for Deans, Tamiya Mini, TRX and XT30 used random seam position and fuzzy skin with the following options: Contour only, Displacement + Extrusion, Classic, Distance: 0.1mm, Thickness: 0.1mm.
This way the caps will be rugged outside and so not too slippery when you trying to remove them.

P.S. I'm using the charger mostly with XT60 F to XT30 M adaptor, not with this charging cable.