Ingenico Move 5000 Kiosk Mount

Designed for Intercard Tellers.

Side screws and nuts (4 x M4 x 20mm): https://www.bunnings.com.au/pinnacle-m4-x-20mm-black-ruspert-round-head-bolts-and-nuts-12-pack_p0257685?store=7175&gclsrc=aw.ds&gad_source=1&gad_campaignid=21122993677&gbraid=0AAAAADtbEB9ZgTniufRob_4OlwJC1Cgcl&gclid=EAIaIQobChMI4N6N5_GzlAMVEH0PAh1Z6yyvEAQYASABEgLUvPD_BwE

Power plug cover (4g x 12mm flat head): https://www.bunnings.com.au/zenith-4g-x-12mm-zinc-plated-hinge-long-thread-countersunk-head-timber-screws-100-pack_p2433594?store=7175&gclsrc=aw.ds&gad_source=1&gad_campaignid=21122993677&gbraid=0AAAAADtbEB9ZgTniufRob_4OlwJC1Cgcl&gclid=EAIaIQobChMIouftmfKzlAMVRtUWBR1DgCvtEAQYASABEgKBvPD_BwE

Base to teller screws (2 x M4 x 16mm - use washers between the printed mount and screw at the very least and preferably nyloc nuts): https://www.bunnings.com.au/pinnacle-m4-x-16mm-black-ruspert-round-head-bolts-and-nuts-12-pack_p0257683

IEC adaptor (Intercard uses these weird IEC power boards. This adaptor will allow you to use an available socket without the need to rewire or run an extension cord into the teller to power the plug packs separately): https://www.jaycar.com.au/iec-c14-male-to-3pin-mains-socket-150mm/p/PS4100

5vDC plugpack (min 1.5A using a 1.4mm/3.5mm DC plug): https://www.jaycar.com.au/5v-dc-3a-slim-power-supply-7dc-plugs/p/MP3480?srsltid=AfmBOooGNZ-bl_H3TBtfoSMzrekeg5B22AqyfCptMIv--iE6x4AP_MAY

Note: This mount is purely for the pinpad. The base must be mounted inside the kiosk (reasonably close to where the pinpad is mounted to ensure reliable wireless connection between the base and pinpad). You'll need another 5v plugpack for the pinpad. We use the OEM plugpack for the pinpad (since the OEM plug is 90 degrees and fairly compact) and an aftermarket plugpack for the base.