Diecast HotWheels blister pack wall hanger

Wall hanger for 5 blister HotWheels packs (or for any other blister with 11cm width) + hooks

Hanger can be mounted directly to the wall with 2 screws (⌀3mm) or using a flat bar, like in the photos.

Added two types of hooks - if you want to stack/couple the hangers – see the main photo.
I mounted it on a 2 mm thick aluminum bar. The aluminum bar is offset 3 mm from the wall with spacers. Hopefully everything is clear from the photos :)

For blister with 11cm width.

Printed in PLA with auto-generated support inside overhangs. The support is easily removable with a knife (be careful).
I also recommend using an outer brim or mouse ears for better adhesion to avoid warping in the corners.

UPDATE: December 24, 2025 - added model (ver.2) with improved details for easier inserting of blisters into the holder