Summary

The Daewoo CPC-400 or 400S MSX2 computer has a peculiar power connector that I could not locate on Ebay or AliExpress. I used bare shrink-tubed VH3.96 terminals to connect my TinyPSU power supply to the motherboard as I was lacking the original PSU. At some point I decided to make a 3D model of the power connector specifically for this MSX2 machine. The VH3.96 terminals fit well into this connector, but you will need a crimping tool to fix wires in those terminals. I also include the 3MF profile for Kobra X printer. See notes on printing below.

If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page:

https://www.thingiverse.com/Wierzbowsky/designs

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Kobra</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong> AnyCubic PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print the connector vertically with its bottom on the printing bed. Change the wall settings to be exactly 0.4mm, otherwise the outer walls will not be printed. Brim is recommended, supports are recommended (tree-shaped support is preferable). PLA or PETG is recommended.</p></div>

Power connector for Daewoo CPC-400 or 400S mainboard

Power connector for Daewoo CPC-400 or 400S mainboard

Related Models