Amiga 500 Power/FDD LED replica to host 2 small LEDs

I've got a vandalized Amiga 500 keyboard board with missing power and disk drive LEDs - someone probably took them to repair his Amiga. Those are special LEDs with 2 built-in lights that can't be normally purchased on AliExpress. But you can buy small LEDs and use them instead. You just need something to put them in. And here comes the replica of the original LED that can host 2 small LEDs. For the red LEDs you need to change the resistor R6, otherwise the red will be too bright. Please use the 1kOhm resistor instead of the original one.

I printed the replica with clear filament, but this obviously needs some matte one in order to look like the original. The 0.12mm layer height is recommended. I am including the 3MF project file to print 4 of those replicas on Kobra X.

If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page:

https://www.thingiverse.com/Wierzbowsky/designs