Parametric Hanging Pond/Aquarium Planter

Starting a half barrel pond and needed some planters to hang on the rim.

My habit lately is to make everything parametric (in Fusion360) so you should be able to change the parameters to make it fit your purpose, making it larger or smaller (maybe for aquariums) as needed.

I tried to document what each parameter is for in the parameter comments, but you can always play around with changing things.

The STL attached to this “thing” has the parameters in the image attached, and worked well for my purpose (they hold the Creeping Jenny in my photos of my pond).

Note: The photo of the empty one hanging off the back of my pond was too large (5.5”), too thick (2mm), and not deep enough but I figure I can use it to hold pond supplies or a terrestrial plant or something.