Mega Man Arm Blaster

NOTE: This is version 1 and I made it in one afternoon.

I designed this Mega Man arm blaster based on a picture someone did online of a highly detailed arm blaster. Using the two images he made as a reference I modeled this up. I have included a full blaster body file for people that have a printer that can print the whole body in one shot which is over 11 inches long. There is also split version of the blaster body that can fit the average printer. If you print the split version, there is a 'blaster body alignment tab' just print and glue the tabs to the inside of the blaster body so the body will be aligned when putting the two halves together. The buttons should snap into place without glue.

The 'bottom' where your arm enters the blaster I made large enough to fit people with think/muscular arms. Once you print it, I suggest adding foam or padding to the inside to stabilize the blaster.

Item Qty:

• Blaster Body (1) / or 1 of each blaster body half
• Button: x6
• Blaster Detail: x1
• Barrel Detail: x4

Planned Changes:

• Lighting Channels for Barrel
• Lighting Channel for Buttons
• Hand Grip inside