Soukaku mask (easy print and assemble)

Game accurate, little to no supports, and small build plate friendly. I designed this for a friend a while ago.

Print all pieces very light (low infill) but with some shells if you plan to sand it down.
All files with _M at the end are mirrored versions for the other side.

tooth 1T means first top, and 1B would be first bottom.
for the teeth, best to print them on the longer thin side.

For assembly, snap jaw.stl to jaw connect.stl,
then slot side 2 scaled.stl and the mirrored version into jaw connect.stl,
then push the front plate.stl into place.
Apply adhesive (hot glue fine) to keep everything together.

You can just hot glue all teeth parts to the mask.

There are slots for a strap on each side 2.stl part if you want to make it wearable, though I would recommend adding padding as well.